Month: June 2019

Fuel Tanks for Sale Tips for Cleaning

 Fuel Tanks for Sale and How to Clean Them

Every car owner would be delighted to come across fuel tanks for sale, most especially if they know they really have a dire need for such pieces of equipment. After you acquire one, then the next thing you need to concern yourself about is its proper maintenance, which includes cleaning the tank. Yes, you need to clean your fuel tank squeaky clean. 

Here’s why!

Over time, rust and sediments will get deposited in your tank. This is most evident in older vehicles, sediments will accumulate in them over time. Sure, fuel filter does their job right, but if you will not change them as often as you should or ever, then your tank will deserve a thorough cleaning. 

Keep in mind that any vehicle that’s been sitting around for quite some time, like a few months or so, is likely to suffer from problems with the tank due to condensation. Consequently, with this happening, it will pave the way for corrosion (that is if what you have is a metal gas tank). 

Basically, this is what you will need to do first if what you purchased is a qualified vintage car and you will have it for a restoration project, instead. Same is true when you have a vehicle that’s been sitting around in your garage for a while.  

Safety Considerations

  • If you are working around any combustible material such as fuel, it is better that you have a fire extinguisher nearby. Additionally, see to it that you properly ventilate your workspace so you get to avoid inhalation of the fumes.  
  • To increase your level of safety, make use of the proper  gears for the job such as a respirator mask, safety goggles, and safety gloves
  • Never allow anyone near your workspace to make use of an open flame or any kind of tool that is likely to create a spark. This includes space heater, welding tools, or propane torch.  
  • If you are thinking that fuel tanks for sale will have no need to get through this phase think again. 

Safely Drain Your Fuel Tank

There is a manifold of reasons that will compel you to drain your tank. What we usually hear nowadays is bad gas. Back in the olden days, “bad gas” would mean years old fuel, or that it might have been contaminated with water. Another is that it was full of foreign matter or solid debris. 

It will seldom happen that you will end up having bad gas inside your fuel tank, even if there are a few cases where people would complain about having obtained that right from the fuel refilling station’s pump. 

But for the most part, this is an issue most complained about by farmers and those who are into the habit of buying antique vehicles. It is because they’re likely to let things sit for a long while, they would skip on cleaning and clearing up the old fuel from the engine or tank prior to trying to bring some internal combustion equipment to life again.  

Get a Proper Gas Siphon

When you bring this topic, what comes to mind in most people about siphoning gas out from their truck’s gas tank is a picture not so pleasing to look at. They are thinking they need to suck on a long tube, the end of which is shoved into the fuel filler hole in an effort to take out the gas, manually. 

For this purpose, use the proper manual pump. It needs to have that seal of approval for combustible liquids, like for instance diesel, gasoline, or any other high-value liquid. 

Pump the Gas Out of Your Tank

Before you commence on pumping, see to it that you are all set up. You need to have on standby an approved gasoline container. Make it handy so it can hold the gasoline straightaway. 

You may need more than one in case that your tank is full. Please do the necessary computation/estimation before you even start.  After which, your inlet hose should go into your gas filler hole. 

Removing the Siphon Tube from the Gas Tank

With all of the gas now drained out from your fuel tank, you should be good to go in as far as installing your brand new fuel filter is concerned. 

Or perhaps you can put in another fuel sender. Or find some good fuel tanks for sale and replace the entire system instead. 

Categories: machines

Tags:

Treating Algae in Poly Diesel Fuel Tanks

Poly Diesel Fuel Tanks

Finding out that one of your poly diesel fuel tanks have algae is one thing, but trying to eradicate them for good and keeping them at bay is another ball game. This is the kind of game that you don’t want to be on the losing end if you don’t want to have a perpetual headache.  

Provided that you know what the right solution is, treating algae in diesel fuel is pretty simple to handle. When we say simple, what we exactly mean by this is that you make sure to follow our recommendations below. Doing so will give you better chances of putting this problem behind you.  

Remove Water from Your Poly Diesel Fuel Tanks

When it comes to removing algae and other similar microorganisms from your tank, this is the first in a series of steps that you need to do and follow.  Much like any other organism, fuel microbes need water for them to survive, thrive and flourish. Say that your tank has at least half an inch of water, your best option here is to mechanically drain the water out of it. Should there be anything remaining behind, you can make use of water-absorbing chemical treatment for this purpose. Failing to completely remove water would render your succeeding efforts futile.  

Instead of Generic Water Treatment, Make Use of Biocide

No, we haven’t forgotten that we advised you to make use of a chemical treatment to remove the rest of the water in your fuel tank. It still applies here. But doing that alone won’t exterminate those microbes off. The main purpose of that treatment is to fix the environment and make it harsh for these organisms to thrive and grow in the water.

This is where biocide will come into the picture, it’s purpose mainly is to extinguish the existing active microbial contamination in your tank. Please be aware that fuel biocides are heavily controlled and regulated because they tend to kill any living organism that

I know we just advised to clean up the rest of the water with chemical treatment. That recommendation still applies. But that treatment isn’t intended to kill off the microbes, but rather, to fix the environment to make it harder for them to grow in the water.

Heavily regulated and controlled, fuel biocides tend to kills whatever active living organism not only in water but to whatever liquid they may be used to thrive in, which is a good thing. It will allow you to extinguish mold, bacteria, fungus, and algae. Scavenging the water alone won’t let you achieve the same.

Avoid Undertreating

The common mistake of many when treating algae presence in a poly diesel fuel tank is to undertreat it, by administering only measly amounts of biocide to the affected fuel tank.

When administering biocides, make sure to add enough of it to treat the greatest amount of fuel a tank may be holding and not only the fuel it contains that that particular moment.  

For instance, you have a 12, 000-gallon tank and you have it filled with 5000 gallons of fuel only. The best way to go here is to mix enough biocide to the tank containing 5000 gallons of fuel, this way you are treating the 10,000 gallons.

And by the time they would finally add fuel again, what they will have is 10,000 gallons of fuel with the precise amounts of biocide, powerful enough to exterminate everything it comes in contact with.  

Of course, there are a dozen of other valuable tips that will not be covered here. But by making sure your actions are in line with the recommendations we laid out here, you have better chances of resolving this problem the first time.