Category: Industrial printing

Treating Algae in Poly Diesel Fuel Tanks

Poly Diesel Fuel Tanks

Finding out that one of your poly diesel fuel tanks have algae is one thing, but trying to eradicate them for good and keeping them at bay is another ball game. This is the kind of game that you don’t want to be on the losing end if you don’t want to have a perpetual headache.  

Provided that you know what the right solution is, treating algae in diesel fuel is pretty simple to handle. When we say simple, what we exactly mean by this is that you make sure to follow our recommendations below. Doing so will give you better chances of putting this problem behind you.  

Remove Water from Your Poly Diesel Fuel Tanks

When it comes to removing algae and other similar microorganisms from your tank, this is the first in a series of steps that you need to do and follow.  Much like any other organism, fuel microbes need water for them to survive, thrive and flourish. Say that your tank has at least half an inch of water, your best option here is to mechanically drain the water out of it. Should there be anything remaining behind, you can make use of water-absorbing chemical treatment for this purpose. Failing to completely remove water would render your succeeding efforts futile.  

Instead of Generic Water Treatment, Make Use of Biocide

No, we haven’t forgotten that we advised you to make use of a chemical treatment to remove the rest of the water in your fuel tank. It still applies here. But doing that alone won’t exterminate those microbes off. The main purpose of that treatment is to fix the environment and make it harsh for these organisms to thrive and grow in the water.

This is where biocide will come into the picture, it’s purpose mainly is to extinguish the existing active microbial contamination in your tank. Please be aware that fuel biocides are heavily controlled and regulated because they tend to kill any living organism that

I know we just advised to clean up the rest of the water with chemical treatment. That recommendation still applies. But that treatment isn’t intended to kill off the microbes, but rather, to fix the environment to make it harder for them to grow in the water.

Heavily regulated and controlled, fuel biocides tend to kills whatever active living organism not only in water but to whatever liquid they may be used to thrive in, which is a good thing. It will allow you to extinguish mold, bacteria, fungus, and algae. Scavenging the water alone won’t let you achieve the same.

Avoid Undertreating

The common mistake of many when treating algae presence in a poly diesel fuel tank is to undertreat it, by administering only measly amounts of biocide to the affected fuel tank.

When administering biocides, make sure to add enough of it to treat the greatest amount of fuel a tank may be holding and not only the fuel it contains that that particular moment.  

For instance, you have a 12, 000-gallon tank and you have it filled with 5000 gallons of fuel only. The best way to go here is to mix enough biocide to the tank containing 5000 gallons of fuel, this way you are treating the 10,000 gallons.

And by the time they would finally add fuel again, what they will have is 10,000 gallons of fuel with the precise amounts of biocide, powerful enough to exterminate everything it comes in contact with.  

Of course, there are a dozen of other valuable tips that will not be covered here. But by making sure your actions are in line with the recommendations we laid out here, you have better chances of resolving this problem the first time.  

Characteristics of A Great 3D Printing Machine

Characteristics of A Great 3D Printing Machine

The printing business has become so popular that so many people are getting into it as it can be very profitable. If you are one of them and have been in the business for some time now, you can attest that there has been a great mass adoption in terms of using a 3D printing machine. But, choosing the best printer, especially when it’s your first time to do so can be hard. As you go through a lot of options, here are some features that you need to look into.

Durability

A good 3D printing machine is an asset and not everyone can afford to buy a new one just after using it for a few months. Therefore, it makes sense to obtain a machine that will serve its purpose for the longest time possible, given that you maintain it properly by following the manufacturer’s directions. Read reviews for different printers before you commit on buying one. Never miss checking the duty cycle that refers to the items that the printer can handle on a monthly basis.

Serves the Purpose

There are different kinds of 3D printers that fit various needs. So, ask yourself first why you need to have one and what purpose will it serve. You also need to analyze your needs, as well as the copies that you will be needing on a daily or monthly basis. Moreover, you also need to take a look at the printing surface as there are also different models for this. Some of the popular materials where a 3D printer can be used include paper, rubber, plastic, metals, and many others.

Print Quality

The quality of the finished product is of great importance when choosing the best printer to buy. Check different samples and assess whether they meet your expectations. Find out what people are saying about the output’s quality before deciding. Keep in mind that quality should never be compromised.

Compatibility

At present, customers are more focused on making their lives and work easier and more efficient. The times of wires and cables are all gone. Modern printers today are capable of connecting to different devices through Wi-Fi, Ethernet, and Bluetooth. So, if you are looking for a great printer, then you should make sure that your unit is compatible with your computer and the hardware that you are using.

As there are so many printers available today, especially that almost all of them seem to be so promising with all those great features that come with them, make sure that you take your time in choosing. Check several printers, read the reviews, look into their features, and check all important factors that should be considered before you invest in a printer. After all, you will be spending your hard-earned money on it, so it better be worth it.

Related: 3D Printing Service Melbourne

Finding the Best Food Vacuum Sealer

Finding the Best Food Vacuum Sealer

Vacuum sealers are quite common in restaurants, food manufacturers, and even in households. These machines are used to protect and preserve food products. They are very popular packaging food because of their ability to extend the shelf life of the food. By removing the air around the food, it eliminates all sorts of bacteria and pathogens that thrive in oxygen, which may spoil the food. A vacuum sealer, however, do not eliminate spoilage, but it will delay the process.

Meat and seafood products are the most common food products that are vacuum-sealed especially when the food will be placed in a freezer. Freezing the food can also help extend its shelf life. The sealer bag stops bacterial contamination and at the same time, it prevents freezer burn. Other food that are vacuum sealed are vegetables.

Choosing the Sealer

If you are in a hunt for the best vacuum sealer, you need to consider a few things. You should also be aware that there are two types of vacuum sealers on the market: the external and the chamber vacuum sealers.  Both of these machines may have similar purpose, but they are differ entirely when it comes to the method of packaging.

If you need the sealer for high-volume packaging, choose a chamber sealer since external sealers are ideal for low-volume production. This is because chamber sealers operate at a much higher speed than external sealers. Chamber sealers are also used to replace the oxygen in the bags with nitrogen, as in the case of potato chips. This key factor in packaging is helpful in extending the shelf life of the food.

An external sealer simply removes air inside the bag, and then seals it, while a chamber sealer vacuums air within the chamber and the bag as well, then seals the bag. Then, the machine brings back the normal atmosphere of the vacuumed chamber. It seals the bag inside the vacuum, making the food product 99.99% air-free.

You may allow adjust the amount of air to remove from the bag using a chamber sealer or a high-end external sealer, which ideal for delicate food items. When using a chamber sealer to pack delicate food products, it is usually fitted with an inert gas kit. The machine removes 99.99% air inside the chamber, and then supplement a portion of the inert gas, usually nitrogen, to the chamber before the bag is sealed. With this process, the food is not tightly sealed with the bag, but the air inside will not allow organisms to thrive.

 

If You Choose a Chamber Sealer

If you feel that the chamber vacuum sealer is best for you and your production, determine the maximum capacity of the machine. In other words, identify the maximum size of the product that can be packaged in the chamber because chamber sealers come in different sizes. You may want to purchase the largest size possible because, you’ll never know, you may have to pack larger products in the future. If you will use a large chamber sealer, you can pack multiple items at one time, increasing speed and productivity.

3D Printing Perth: Top Benefits the Technology has to Offer

Technologies are doing well when it comes to product development. Among the latest shifts in product development is the impact of 3D printing Perth on rapid prototyping. Below are some of the known benefits of using this technology.

Time to Market

3D printing lets ideas to develop quicker than ever. Being capable of 3D printing an idea the same day it was planned shrinks the development process from what may have been months to a matter of days, serving companies stay one step ahead of their competition.

Saves Money

Prototyping injection mold gears and production runs are pricey investments. The 3D printing Perth process lets the creation of parts and tools through additive manufacturing at rates much lesser than traditional machining.

Mitigate Risk

Being able to authenticate a design before capitalizing in an expensive molding tool is worth its weight. Printing a production-ready prototype shapes confidence before making these major investments. It is also far inexpensive to 3D print a test prototype than to alter or redesign an existing mold.

Clear Communications

Describing the product that you are going to bring is often misunderstood since it leaves construction up to the mind and imagination. A conceptual image of the product is better than its description since it is worth 1,000 words, but being able to hold the concrete product-to-be, in hand, clears all lines of communication. There is no vagueness when holding the exact, or at least a very close, symbol of the product.

Feedback

With a model you can test the marketplace by unveiling it at a trade-show, presenting it to potential investors or buyers, or increasing capital by pre-selling. Getting buyers reply to the product before it actually goes into manufacturing is a valuable way to confirm if the product has market potential.

Get the Feel

One thing you cannot get from a virtual prototype on the computer screen is the way how something feels in your hands. If you want to guarantee the ergonomics and fit the product are just right, you need to actually hold, use and test it.

Personalize It

With typical mass-production, all fragments come off the assembly line or out of the mold the same. With three dimensional printing, one can customize, personalize and tweak a part to exclusively fit their needs, which permits for custom fits in the dental and medical industries and helps set individuals apart in the jewelry and fashion world.

Build your Imagination

In the contemporary boom of digital art and design, the potentials are not only accelerating but unlimited. One can now print almost anything they can imagine after drawing it up. In a fairly short time, a concept, idea, dream or invention can go from a simple thought to a produced part that can be hold and touched.

Fail Fast, Fail Cheap

Being able to examine ideas rapidly and discover what does not work hastens discovery leading to an idyllic solution. 3D printing lets a product developer to make advances at early stages that are relatively low-cost leading to better products and inexpensive dead-ends.

With all the things mentioned above, you can definitely get so much benefits from the use of 3D printing technologies. Make sure that you make the most out of all these benefits.

 

Categories: Industrial printing