Category: machines

Fuel Tanks for Sale Tips for Cleaning

 Fuel Tanks for Sale and How to Clean Them

Every car owner would be delighted to come across fuel tanks for sale, most especially if they know they really have a dire need for such pieces of equipment. After you acquire one, then the next thing you need to concern yourself about is its proper maintenance, which includes cleaning the tank. Yes, you need to clean your fuel tank squeaky clean. 

Here’s why!

Over time, rust and sediments will get deposited in your tank. This is most evident in older vehicles, sediments will accumulate in them over time. Sure, fuel filter does their job right, but if you will not change them as often as you should or ever, then your tank will deserve a thorough cleaning. 

Keep in mind that any vehicle that’s been sitting around for quite some time, like a few months or so, is likely to suffer from problems with the tank due to condensation. Consequently, with this happening, it will pave the way for corrosion (that is if what you have is a metal gas tank). 

Basically, this is what you will need to do first if what you purchased is a qualified vintage car and you will have it for a restoration project, instead. Same is true when you have a vehicle that’s been sitting around in your garage for a while.  

Safety Considerations

  • If you are working around any combustible material such as fuel, it is better that you have a fire extinguisher nearby. Additionally, see to it that you properly ventilate your workspace so you get to avoid inhalation of the fumes.  
  • To increase your level of safety, make use of the proper  gears for the job such as a respirator mask, safety goggles, and safety gloves
  • Never allow anyone near your workspace to make use of an open flame or any kind of tool that is likely to create a spark. This includes space heater, welding tools, or propane torch.  
  • If you are thinking that fuel tanks for sale will have no need to get through this phase think again. 

Safely Drain Your Fuel Tank

There is a manifold of reasons that will compel you to drain your tank. What we usually hear nowadays is bad gas. Back in the olden days, “bad gas” would mean years old fuel, or that it might have been contaminated with water. Another is that it was full of foreign matter or solid debris. 

It will seldom happen that you will end up having bad gas inside your fuel tank, even if there are a few cases where people would complain about having obtained that right from the fuel refilling station’s pump. 

But for the most part, this is an issue most complained about by farmers and those who are into the habit of buying antique vehicles. It is because they’re likely to let things sit for a long while, they would skip on cleaning and clearing up the old fuel from the engine or tank prior to trying to bring some internal combustion equipment to life again.  

Get a Proper Gas Siphon

When you bring this topic, what comes to mind in most people about siphoning gas out from their truck’s gas tank is a picture not so pleasing to look at. They are thinking they need to suck on a long tube, the end of which is shoved into the fuel filler hole in an effort to take out the gas, manually. 

For this purpose, use the proper manual pump. It needs to have that seal of approval for combustible liquids, like for instance diesel, gasoline, or any other high-value liquid. 

Pump the Gas Out of Your Tank

Before you commence on pumping, see to it that you are all set up. You need to have on standby an approved gasoline container. Make it handy so it can hold the gasoline straightaway. 

You may need more than one in case that your tank is full. Please do the necessary computation/estimation before you even start.  After which, your inlet hose should go into your gas filler hole. 

Removing the Siphon Tube from the Gas Tank

With all of the gas now drained out from your fuel tank, you should be good to go in as far as installing your brand new fuel filter is concerned. 

Or perhaps you can put in another fuel sender. Or find some good fuel tanks for sale and replace the entire system instead. 

Categories: machines


How to Find the Perfect Pallet Wrapping Machine?

If you will try to shop for an industrial machine like the pallet wrapping machine on your own, you might find yourself having a hard time making a decision about it. It is because you don’t have a way of knowing how well the machine in question will be or how it will likely cope in your facility until such time that you really see it in action. When that time comes, it might be too late for you to deal with any issue if one should arise. This article intends to provide you with relevant pointers on how you can find the right pallet wrapping machine to buy.

Before anything else, it is of paramount importance that you ensure that what you are choosing is nothing but the right kind of pallet wrapping tool for your company’s production process. Do you think you have a need for a fully automatic wrapping that can be integrated into production so as to make your pallet of product load wrapped in film and powered off automatically? Or perhaps what you require is somewhat more simple and also easy on the budget. If the best way to describe your business is that it is having a high throughput production line pallet wrapping machines that are fully automatic will be more suitable.  

See to it that the pallets you intend to pack your product offerings on are suitable and fitting with the pallet machine wrapper in question. Everything will be wrong and disastrous if you acquired a pallet wrapping machine for your facility only to realize later that the pallets you have don’t fit. Pallets come in various sizes and shapes, hence, it would be wise to advise your potential supplier the size of pallets that you are currently using. By this measure, they can surely advise you accordingly.

They might need to know the specific dimensions that your largest pallet comes in or the maximum height of the product that you will most likely have on the pallet and the average weight they will be in. Standard pallet wrapper usually has a 1700 mm base diameter. This is quite suitable enough for UK standard pallet sizes.  

Reach out to a potential supplier you have and see if there is any possible way you can arrange trials for your products. Some would even agree to lend you their machine for about a week so that you can really have a good grasp on how well it will work for you and your products. Consider a team of wrapping machinery supplier good if they can test out your product using an array of stretch wrapping films. By this, they can tell you which one is best and most importantly what would be the potential costs

Take caution if a company would be offering you bargain basement prices. Bargain prices are always practical to have, but there are few exceptions for that and this applies in this kind of situation, too. Our best advice here is to take extra diligence, most especially when it is about suitability. There usually is a reason why it is offered out cheaply. Should you realize that the pallet wrapper is used up, you will need to know what efforts have been carried out in order to recondition it, the machine itself.

Related: cryovac bags

Some companies that offer pallet wrappers for well under the prevailing market price under the condition that if you will decide to make a purchase, you are committing to buy the stretch wrap film you will need from them, too. Should this be the case, then you will figure out eventually that the film itself is way lot more expensive. You may have acquired the pallet wrapping machine at a cheaper price, but that has just gone down the drain, too.  

Categories: machines